OPERATING INSTRUCTIONS

ANALOG/DIGITAL WATCHES

R302 ADRENALIN

FEATURE FUNCTIONS:

  • Hours, minutes, seconds, day of the week.
  • Month and date.
  • Chronograph 1/100 second with
  • lap/split control.
  • 12 or 24 hour display option.
  • Maximum counting 23 hrs 59 mins 59 secs

NORMAL READOUT

  • Press S1 once: month, date and day of week.
  • Press S2 once: alarm time.
  • Press S3 once: chronograph function

SETTING SEQUENCE

NORMAL TIME SETTING

  1. Press S3 three times to get to normal time setting mode. "SECOND" will start flashing. Press S1 for synchronization.
  2. Press S2 once. "MIN" will start flashing. Press S1 to advance.
  3. Press S2 once. "HOUR" will start flashing. Press S1 to advance. Keep pressing S1, and the display will show "A" (for AM), "P" (for PM), and "H" (for 24 hour format).
  4. Press S2 once. "DATE" will start flashing. Press S1 to advance.
  5. Press S2 once. "MONTH" will start flashing. Press S1 to advance.
  6. Press S2 once. "DAY OF WEEK" will start flashing. Press S1 to advance.
  7. Press S3 once. Setting is complete. Return to normal time readout.

ALARM TIME SETTING

  1. Press S3 twice. Alarm time "HOUR" will start flashing. Press S1 to advance.
  2. Press S2 once. Alarm time "MIN" will start flashing. Press S1 to advance.
  3. Press S3 once. Setting is complete. Return to normal time readout.
  4. Alarm will stop itself after 20 seconds, or can be silenced by pressing S1. In either case, the alarm will sound again at the same time the next day.
  5. To set the alarm ON or OFF, press S1 and S2 at the same time.

CHRONOGRAPH SETTING

    Press S3 once to get into "CHRONO" mode.

For NORMAL COUNTING:

  1. Press S1 to start and stop.
  2. Press S2 to reset to zero.

For LAP COUNTING:

  1. Press S1 to start counting.
  2. Press S2 to enter lap time mode. This means that one portion of the counting is registered on the display while the counting continues until completed by pressing S1 and then pressing S2 twice.

Battery Replacement

For LCD Display use battery UC392.

For analogue movement use battery UC377, found under the large battery circuit plate. To be replaced by watch repair specialists only.

BACK